Finisar's Current Status: The Short Answer
Finisar is now a Coherent Corp. brand. II-VI Incorporated acquired Finisar in September 2019, and the merged company renamed itself Coherent in July 2022. The Finisar name still shows up on plenty of datasheets and product listings, but the company behind those modules is Coherent. The FTRJ8519P1BNL is still manufactured — a 1G SFP (1000BASE-SX) for multimode fiber, 850nm, up to 550m on OM2. If you searched "finisar 8110" or "finisar phones," those are almost certainly noise. Finisar never made phones, and there's no current SKU called "8110" in the catalog I can check.
That's the headline. The rest of this is what I'd want to know if I were the one placing the order: what the module actually does, where compatibility claims get slippery, and when this part is the wrong choice for your network.
Why I'm Writing This
I'm a supply chain manager at a network hardware distributor. Over the past 7 years I've handled 300+ rush orders, including same-day turnarounds for system integrators and data center clients with hard deployment deadlines. When a client calls at 10 a.m. and needs 50 SFPs by Thursday, that's my problem to solve.
In March 2024, a client called 36 hours before a network cutover needing 60 FTRJ8519P1BNL modules. Standard lead time at the time was 4-6 weeks (this was back when inventory was still uneven from the 2022 shortages). We found a distributor with stock, paid roughly $400 extra in rush fees on top of the ~$1,200 base cost, and delivered by Wednesday noon. Missing that deadline would have triggered a $40,000 liquidated damages clause on their contract.
I've also made the cheaper mistake — the one where you save a little upfront and pay for it later. We once saved about $6 per module by going with a third-party "equivalent." Two of them failed within 30 days on a critical uplink. The downtime and replacement labor wiped out the savings, plus some. That's when I learned to read the MSA compliance details instead of just the price line.
What the FTRJ8519P1BNL Actually Is
Strip away the part number and it's a fairly standard 1G transceiver. Here's what the datasheet says — and what I've seen hold up in practice:
- Speed: 1.25 Gb/s (compatible with 1000BASE-SX and 1G Fibre Channel)
- Wavelength: 850nm VCSEL
- Reach: Up to 550m on 50/125μm multimode (OM2), 300m on 62.5/125μm (OM1)
- Connector: Dual LC
- Form factor: Standard SFP, hot-swappable
- Monitoring: Digital diagnostics (DDM) per SFF-8472 — verify this on the exact datasheet revision you're buying
- Temperature range: Commercial (0°C to 70°C)
Typical use cases are switch-to-switch links, server NIC connections, and 1G uplinks inside a building. If you're running anything faster than 1G, this isn't the part — a 10G SFP+ (like the FTLX8571D3BCL) or 25G SFP28 would be the right bracket. Finisar's broader product line (now mostly under Coherent branding) spans 1G through 400G across SFP, SFP+, SFP28, QSFP, QSFP28, CFP, and QSFP-DD form factors.
Compatibility: Read the Fine Print
Here's where I've seen people get burned. The FTRJ8519P1BNL is a standards-based module. It meets the MSA (multi-source agreement) specs for 1000BASE-SX. That means it should work in any device that follows the same standard — and most enterprise switches do.
But "should work" and "will work in your specific chassis with your specific firmware" are two different claims. In my first year doing this, I made the classic specification error: assumed "1000BASE-SX compatible" meant plug-and-play across every switch brand. It didn't. One client's older Cisco gear rejected a batch of third-party SFPs after a firmware update, and we spent three days troubleshooting before swapping to modules with the OEM's coding. Cost us a $900 restocking fee and a lot of goodwill.
FTC advertising guidelines require that compatibility claims be truthful and substantiated (ftc.gov). So when a vendor says "100% compatible," ask for the specific platforms and firmware versions they've tested. If they can't name them, treat that claim with some skepticism. Even original Finisar modules can behave differently across firmware revisions — I'm not 100% sure why some Cisco IOS versions are pickier than others, but I've seen it happen more than once.
What About "Finisar 8110" and "Finisar Phones"?
I looked. There's no current Finisar product labeled "8110." The catalog uses the 85xx pattern for 1G modules (8519, 8571, 8574) and other ranges for different speeds. "8110" doesn't map to anything I can verify in the Finisar/Coherent lineup.
Best guesses: it's a legacy SKU that got de-listed years ago, a model number from another vendor that got mixed into search results, or plain search noise. Same story with "finisar phones" — Finisar has never made consumer phones. If you landed here from that query, you're probably looking for a different brand (or autocorrect did you dirty).
When This Module Is the Wrong Choice
I'm not an optical engineer, so I can't speak to laser aging curves or dispersion penalties — for that, talk to an actual optical engineer. What I can tell you from a procurement perspective is when to stop looking at this part:
If your link exceeds the reach spec (550m on OM2, 300m on OM1), you need a different module — likely a 1000BASE-LX with single-mode fiber. If you need 10G or faster, this is the wrong bracket entirely. If your deployment runs in an industrial environment outside 0-70°C, you need an extended-temperature variant. And if you're buying for carrier-grade or hyperscale infrastructure, the failure tolerance and qualification requirements are different from what I've seen in enterprise work.
My experience is based on roughly 300 enterprise-level orders — data centers, office campuses, system integrators. If you're doing carrier-grade deployments, your requirements (and your risk appetite) are probably different. Take the compatibility notes above with that grain of salt.